概述
該閥結構設計新穎,流通面積大,流阻小,開啟度大,節電效果顯著,密封性能可靠,密封性能可靠.耐磨損.且具有緩閉消聲的作用。
Overview
This valve is featured by original structure, large circulating area,little flaw resistance, broad opening, distinguished electricity saving, de-pendable sealing performance,
產品圖:
可選配件:
概述 該閥結構設計新穎,流通面積大,流阻小,開啟度大,節電效果顯著,密封性能可靠.耐磨損.且具有緩閉消聲的作用??筛鶕?jù)不同的水況調節優良的緩閉時間.消除水錘。主要用于給排水管道上,安裝在水泵的出口處.用以截?cái)嘟橘|(zhì)的逆流,消除破壞性水錘,保證管路、水泵的安全運行,使用壽命長、無振動、無嗓音。 |
Overview This valve is featured by original structure, large circulating area,little flaw resistance, broad opening, distinguished electricity saving, de-pendable sealing performance, abrasion resistance, as well as slow shut and noise elimination. Functioned to effect optimal time for slow shut and for eliminating water hammer according to different occa-sions, this valve is mainly used in water supply and drainage pipeline and mounted at the outlet of pump to cut off backflow of medium, e-liminate destructive water hammer, ensure the safe operation of pipeline and pump, and actualize long service life, little vibration and noise. |
結構示意圖Structural Diagram ![]() |
安全示意圖Install the sketch map ![]() |
主要性能參數Main Performace Parameters
型號 Type |
公稱壓力 PN(MPa) |
試驗壓力Ps(MPa) |
工作溫度(℃)Working Temperature(℃) |
適用介質 Applicable Medium |
|
殼體Shell |
密封Seal |
||||
H 10 Hh44X/Z-16 T 25 |
1.0 |
1.5 |
1.1 |
≤80(根據客戶要求可達到200) Can be up to200 according to customer’s enquiry |
水、污水、海水等 Water,sewage, Sea water,etc. |
1.6 |
2.4 |
1.76 |
|||
2.5 |
3.8 |
2.8 |
主要零件材質Main Parts and Materials
零件名稱 Name |
閥體、閥蓋 Valve Body Bonnet |
閥瓣 Disc |
閥桿 Valve Stem |
材料 Material |
灰鑄鐵、鑄鋼 Casting iron Casting steell |
鋼板+橡膠組件 Stencil plate+ Rubber package |
不銹鋼 Stainless Steel |